How To Tie Down Dirt Bike On Hitch Carrier

Last Updated on July 11, 2023 by Will Sabel

Some people claim that riding dirt bikes helps them relax. Riding dirt bikes improves your street riding significantly. Most people view it as an extreme sport. You may also use the abilities you acquire on the dirt to your benefit on the road, whether you travel, enjoy driving on winding rural roads, or take part in the race tracks. 

If you ride through into the wilderness or anything, you may get a bit muddy; however, that does not compare to the experience you could have. 

The trouble lies in transferring dirt bikes from one area to some other without damaging them.

What Exactly Are Dirt Bikes?

Off-road riding’s severe conditions are designed to be handled by dirt bikes. Because a lot of riding takes place on roads with dirt, sand, and some other severe climate conditions, which could damage engines. 

To handle dirt roads, they are constructed with a greater improvement than street bikes however have knobby tires.

What Makes A Dirt Bike Require A Hitch Carrier?

With the aid of a hitch carrier, shipment may be transported on the back of a vehicle by connecting to the trailer hitch. 

Alternatives to pickup truck beds and tow-behind trailers for transferring your dirt bike are dirt bike hitch carriers.

tying dirt bike on hitch mount carrier

Secure Dirt Bike to Hitch Carrier – 4 Steps

Here is a way to securely lock your dirt bike by the use of a step-by method so that you can travel without worrying about your bike.

Step 1: Preparation

First things first, prepare the truck on which you may install the hitch carrier. When setting up, you should put safety first. And you should understand which hitch class your vehicle’s hitch can support to perform this. 

Then, if not already included, you’ll be able to purchase wheel chocks. Before putting the hitch carrier at the vehicle’s receiver, attach the wheel chocks there first. Find a ramp and place it after the hitch carrier.

Now cautiously push the dirt bike onto the ramp and move it toward the carrier. At this point, the front wheel is fastened to the wheel chocks. 

And remember to set up the straps so that they pull the dirt bike towards the wheel chock and inward. Driving may be extremely tough because the front wheel isn’t securely mounted since you will constantly be monitoring.

Step 2: Set up the straps

Now Hardware shops will offer extra straps designed mainly for hitch carriers. At least 4 straps are needed for the tie-down.

Now that the dirt bike is fastened avoid leaning at all costs. Each handlebar’s strap ought to be lightly fastened to the carrier’s base. Then, hook the straps cautiously to ensure that the knot is stable.

You can now pass the carrier to the alternative side. Now, you’ll want to search for a solid area wherein you could securely hook the straps. Some people choose to secure them across the sitting portion, even as others fasten them to the vehicle with the back wheel. 

The auxiliary elements can’t be used to secure the straps; the only dirt bike body may be used. The back wheel should be securely held in place when driving by employing.

Simply adhere to the instructions for securing the front wheel this time, even with the use of the back wheel. Two straps, firmly fastened and linked to the hitch carrier, are considered a critical part, and you’ll need roughly of them.

Step 3: Examine the Straps’ Strain

Make sure the strain between the back and front maintains the same. The bike should still be erect. If unsure, take hold of the dirt bike vertically and make the straps tighter. 

Put as much pressure as you can on the tension. You should additionally keep this in mind to ensure secure strapping to the back. The risk is already present if not. Now is to observe everything from one side. 

You’ll be able to tell if the dirt bike is tilting in that direction or not. Locate the tension causing the leaning, and release it, after which fasten the component correctly.

Step 4: A Final Check

You can shake your dirt bike to ensure it is securely mounted to the hitch carrier. Hold onto the handlebars and shake them vigorously.

Before and throughout the journey, inspect the weight itself, the quality of the straps, and their stiffness regularly to maintain safety.

Let’s watch an awesome video:

The Summary

While racing with a dirt bike is exciting and enjoyable, tying it up and hauling it around cannot be said to be equally so. But you must be aware. 

Additionally, since a dirt bike has no license to operate, it cannot be pushed on public roads. 

So off you go to the woods! It is crucial for your safety and the protection of others to properly secure a dirt bike here on a carrier, that is pretty easy if the regulations and instructions are followed.

Frequently Asked Questions

How do you carry a dirt bike on a car?

You can carry a dirt bike on a car using a hitch-mounted motorcycle carrier. The hitch carrier attaches to the vehicle’s hitch receiver. Then the dirt bike is loaded onto the carrier and secured with straps for safe transportation.

Can a dirt bike fit in a car?

The most effective way to transport a car is with a truck; however, you may also move a dirt bike with your car.

Is a dirt bike license required?

On maximum private property, a driver’s license is normally not required; however, on public roadways, you almost always need one.

Can you lay down a dirt bike?

A motocross bike can be laid on its side while being transported, but you should drain out all the fluids beforehand. These fluids could leak all around your vehicle if you don’t do this.

Related Reviews & Guides:

Author: Will Sabel

Will Sabel is an avid car enthusiast. When he's not writing for RidersWant, you'll find him cruising the country in a new car. People are always wondering how many cars he has!

Leave a Comment